Reinitialising Usb Input Devices - G&D DP1.2-VisionXG-Fiber Installation Und Bedienung

1. In the menu, click on
2. Click on the KVM extender you want to configure and then click
on Configuration
3. Click on the tab
4. Click on the tab
station (on the
Click on the tab
workstation (on the
5. In the Scancode set
ing options:
Set 2 activates scancode set 2 for PS/2 keyboard inputs
activates scancode set 3 for PS/2 keyboard inputs
Set 3
6. Click on Save
7. Turn the KVM extender off and back on again.
After you turn the KVM extender on again, the keyboard is initialised and the
selected scancode set is applied.

Reinitialising USB input devices

After connecting a USB keyboard or mouse to the KVM extender, the input devices
are initialised and can be used immediately.
Some USB input devices require a reinitialisation of the USB connection. Enable
the automatic reinitialisation of USB devices if a USB keyboard or mouse does not
respond to your inputs during operation.
.
KVM extender
.
.
General
if you want to configure the setting of the local work-
CPU
CPU module).
if you want to configure the setting of the remote
CON
CON module).
field of the Configuration
.
section, select one of the follow-
G&D DP1.2-VisionXG-Fiber · 46
Configuration