Changing The Time Span Of The Input Lock; Right For Exclusive Access To The Console - G&D DP-Vision-Fiber Installationanleitung Und Betriebsanleitung

Changing the time span of the input lock

When carrying out keyboard or mouse inputs at a console, the KVM extender auto-
matically locks the input devices of the concurrent console. The lock is lifted if no
input is made at the active console within the adjusted timing of the input lock
(default: 1 second).
After the lock has been lifted, both users can operate the computer again.
The time span of the input lock can be adjusted between 1 and 90 seconds.
How to change the timespan of the input lock:
1. Press
Ctrl+Num
2. Select the row
3. Select the row
4. Under Multiuser input lock
seconds).
5. Press F2 to save your settings.
1. Click on
KVM Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender to be configured.
3. Click the General
4. Under Multiuser input lock
seconds).
5. Click OK to save your changes.
Related topic:
 Operating the KVM extender exclusively on page 17

Right for exclusive access to the console

If no inputs are made at the active console during the adjusted time span of the auto-
matic input lock (default: 1 second), the default settings of the KVM extender permit
the other console to operate the extender.
If the function right for exclusive console access is activated in the web application,
you are able to operate the KVM extender exclusively by pressing the hotkey
key+Print (default: Ctrl+Print
(default) to open the on-screen display.
System setup and press
Hotkey and press Enter
enter the desired timespan of the input lock (1 to 90
tab.
enter the desired timespan of the input lock (1 to 90
).
Enter .
.
on the directory tree.
G&D DP-Vision-Fiber · 30
Configuration
Hot-