G&D DP1.2-VisionXG-Fiber Installation Und Bedienung Seite 91

Connecting keyboard and mouse to the console
Network B
Generic
Network A Keyb./Mouse
NOTE: Both the keyboard and the mouse of the console can either be PS/2 or USB
devices.
Keyb./Mouse: Connect the mouse and/or the keyboard of the console to this interface.
In the default settings, you can use this interface to connect another USB
Generic:
input device or a supported display or tablet.
Activate the generic HID
to connect another USB input device. In this mode, any data of the USB input device
is not altered when transmitted to the computer module.
IMPORTANT: If the generic HID
keyboard connected to the
Connect the PS/2 keyboard of the console.
PS/2:
ADVICE: Use the adapter
and a PS/2 mouse.
Connecting the console monitor
A
Transmission
DP Out: Connect the console monitor.
NOTE:
Each video channel of the MultiChannel variant is provided with one
interface. The numbers behind the interface names assign each interface to a given
channel.
Line
PS/2 In Out
mode (see Selecting the USB-HID mode on page 41) if you want
mode is active, the OSD cannot be operated by a
Generic socket.
(A6400043) to connect a PS/2 keyboard
MD6M-2xMD6F
B
DP Out
Main Power
Power
Red.
Main
RS232 Ready Ident.
System Fail
Network B
Host
Link
Network A
USB 2.0 Devices
G&D DP1.2-VisionXG-Fiber · 12
Installation
Red. Power
Generic
Keyb./Mouse PS/2
DP Out