Turn »Fallback Compression« On Or Off - G&D DP1.2-VisionXG-Fiber Installation Und Bedienung

Configuration
Turn »Fallback compression« on or off
Activate Fallback compression if, in the event of a fibre failure, you want to transmit the
image data compressed over the remaining active fibres.
How to turn »Fallback compression« on or off:
1. In the menu, click on
2. Click on the KVM extender you want to configure and then click
on Configuration
3. Click on the tab
4. In the
Fallback compression
options:
Enabled
Disabled
5. Click on Save
49 · G&D DP1.2-VisionXG-Fiber
KVM extender
.
General and then on the tab
field, you can select between the following
 In the event of a fibre failure, the image data is compressed and
transmitted via the still active fibers (default)
 The transmission of the image data is always uncompressed.
.
.
CPU .