Residual Risks; Vibrations (Hand-Arm-Vibrations); Safety Precautions - ATIKA MHB 80 Originalbetriebsanleitung

• Always use hoeing tools suited for the machine as
designated in the operating instructions.
• The intended usage also includes compliance with the
operating, servicing and repair conditions prescribed by the
manufacturer and following the safety instructions included in
the instructions.
• Follow the relevant accident prevention rules for operation
and other generally recognised health and safety at work
rules.
• Unauthorised modifications on the device exclude a liability
of the manufacturer for damages of any kind resulting from it.
• Only persons who are familiarised with the device and
informed about possible risks are allowed to prepare,
operate and service this device. Repair works may only be
carried out by us or by a customer service agent nominated
by us.

Residual risks

Even if used properly, residual risks can exist even if the
relevant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the "Safety advices" and the
"Intended usage" as well as the whole of the operating
instructions are observed.
Observing these instructions, and taking proper care, will reduce
the risk of personal injury or damage to the equipment.
Risk injury of hands and feet if they come close to or under
the rotating parts.
Stones and soil may be thrown off.
Injury by catapulted parts.
Inhalation of dust (soil) and engine exhaust.
Risk of injury by entangling and winding up roots, ropes,
wires or pieces of clothing when contacting the hoeing tools.
Risk of serious injuries when operating the machine without
suited protective equipment.
Risk of injury to the fingers and hands, when carrying out
assembly work and cleaning on the hoeing tools.
Contact of the skin with operating substances (gasoline/oil)
Risk of injury to the hands and feet when transporting the
unit.
Noncompliance with safety instructions may result in injuries
of the operator or property damages.
Risk of electric shock when touching the spark plug
connector while the engine runs.
Impairment of hearing when working on the machine for
longer periods of time without ear protection.
Risk of burns when touching hot parts.
Carbon monoxide poisioning when using the product in
closed or poorly ventilated rooms.
Risk of fire!
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.
18
Vibrations
(hand arm vibrations)
10,0 m/s²; K = 1,5 m/s²
Warning!
The actual vibration emission level during the use of the
machine may differ from that indicated in the operating
instructions or indicated by the manufacturer. This may be
caused by the following factors to be minded before and during
the use:
- Proper use of the machine
- Correct operating of the machine
- Proper condition of the machine for use
- Sharpness and correct assembly of the hoeing tools
- Proper assembly of the operating handles on the machine
body
When you feel uncomfortable or notice discoloration of skin on
your hands during the use of the machine, stop working
immediately. Observe sufficient break times to rest. Failure to
have sufficient break times may result in a hand-arm vibration
syndrome.
The extent of exposure depending on the type of work or
machine use should be estimated and appropriate breaks taken.
In this way, the extent of exposure can be considerably reduced
over the entire work time. Minimise the risk caused by
vibrations. Maintain this machine according to the instructions in
the manual.
Avoid the use of this machine at temperatures under 10°C.
Create a work schedule in order to minimise vibration exposure.

Safety Precautions

Observe the following advices in order to protect
yourself and other persons against possible injuries.
Before starting this device, read and keep to the
following advice. Also observe the preventive
regulations of your professional association and the
safety provisions applicable in the respective country,
in order to protect yourself and others from possible
injury.
Pass the safety instructions on to all persons who work
with the machine.
Keep these safety instructions in a safe place.
Repair works on the safety cut out must be carried out by
the manufacturer or by companies appointed by the
manufacturer respectively.
• Make yourself familiar with the equipment before using it, by
reading and understanding the operating instructions.
• Do not use the machine for unsuitable purposes (see 'Normal
intended use').
• Be attentive. Be careful what you do. Behave sensibly when
working. Do not use the device when you are tired or under
the influence of drugs, alcohol or medicaments. One moment
of carelessness when using the device can result in serious
injuries.