Maintenance And Cleaning Schedule; Guarantee; Operating - ATIKA MHB 80 Originalbetriebsanleitung

Before extended storage, please observe the following to
increase the service life of the device and to ensure smooth
operation:
Thoroughly clean the device.
Oil all moving parts with environmentally compatible oil.
Do not use grease.
Empty the fuel tank completely.
Dispose of remaining fuel in an environmentally
compatible manner.
Operate the engine until the carburetor is empty.
Maintenance work
Fuelling
Operating lever -
Functional test
Throttle trigger / throttle lock-out
switch / ON/OFF switch –
Functional test
Throttle trigger / throttle lock-out
switch / ON/OFF switch –
Have it replaced
Cranking rope - Functional test
Cranking rope -
Have it replaced
Check the fuel tank cap
Replace
Clean fuel filling filter
Clean the fuel filter
Replace air filter
Check the oil level
Refill oil
- Replace
Cleaning the air filter
Replace air filter
Check the spark plug
and spark plug connector
Replace the spark plug
Clean the silencer
Check the carburetor in idle speed
(tool may not rotate)
Have this adjusted
Check the machine
Clean the machine
Replace safety label
Check the clutch
Check the hoeing tools
Replace the hoeing tools

Maintenance and cleaning schedule

Before After
each use each use
Please refer
Instructions" for more information on storing the
engine.
Check the machine for perfect condition to ensure a safe
use of it after a longer period of storage.

Guarantee

Please note the attached guarantee declaration.
After the Every 50 Every 100
first 5 hrs.
hours
to the "Engine

Operating

If
hrs. Required / season
damaged
Each
27