Residual Risks; Vibrations (Hand-Arm-Vibrations); Safety Precautions; Safety Advices - ATIKA MHB 40 Originalbetriebsanleitung

Residual risks

Even if used properly, residual risks can exist even if the
relevant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the "Safety advices" and the
"Intended usage" as well as the whole of the operating
instructions are observed.
Observing these instructions, and taking proper care, will reduce
the risk of personal injury or damage to the equipment.
Risk injury of hands and feet if they come close to or under
the rotating parts.
Stones and soil may be thrown off.
Injury by catapulted parts.
Inhalation of dust (soil) and engine exhaust.
Risk of injury by entangling and winding up roots, ropes,
wires or pieces of clothing when contacting the hoeing tools.
Risk of serious injuries when operating the machine without
suited protective equipment.
Risk of injury to the fingers and hands, when carrying out
assembly work and cleaning on the hoeing tools.
Contact of the skin with operating substances (gasoline/oil)
Risk of injury to the hands and feet when transporting the
unit.
Noncompliance with safety instructions may result in injuries
of the operator or property damages.
Risk of electric shock when touching the spark plug
connector while the engine runs.
Impairment of hearing when working on the machine for
longer periods of time without ear protection.
Risk of burns when touching hot parts.
Carbon monoxide poisioning when using the product in
closed or poorly ventilated rooms.
Risk of fire!
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.
Vibrations
(hand arm vibrations)
MHB 40: 7.76 m/s²; K = 1,5 m/s²
MHB 60: 7.04 m/s²; K = 1,5 m/s²
Warning!
The actual vibration emission level during the use of the
machine may differ from that indicated in the operating
instructions or indicated by the manufacturer. This may be
caused by the following factors to be minded before and during
the use:
- Proper use of the machine
- Correct operating of the machine
- Proper condition of the machine for use
Sharpness and correct assembly of the hoeing tools
-
- Proper assembly of the operating handles on the machine
body
20
When you feel uncomfortable or notice discoloration of skin on
your hands during the use of the machine, stop working
immediately. Observe sufficient break times to rest. Failure to
have sufficient break times may result in a hand-arm vibration
syndrome.
The extent of exposure depending on the type of work or
machine use should be estimated and appropriate breaks taken.
In this way, the extent of exposure can be considerably reduced
over the entire work time. Minimise the risk caused by
vibrations. Maintain this machine according to the instructions in
the manual.
Avoid the use of this machine at temperatures under 10°C.
Create a work schedule in order to minimise vibration exposure.

Safety advices

Observe the following advices in order to protect yourself
and other persons against possible injuries.
Before starting this device, read and keep to the following
advice. Also observe the preventive regulations of your
professional association and the safety provisions
applicable in the respective country, in order to protect
yourself and others from possible injury.
Pass the safety instructions on to all persons who work
with the machine.
Keep these safety instructions in a safe place.
Repair works on the safety cut out must be carried out by
the manufacturer or by companies appointed by the
manufacturer respectively.
• Make yourself familiar with the equipment before using it, by
reading and understanding the operating instructions.
• Do not use the machine for unsuitable purposes (see 'Normal
intended use').
• Be attentive. Be careful what you do. Behave sensibly
when working. Do not use the device when you are tired
or under the influence of drugs, alcohol or medicaments.
One moment of carelessness when using the device can
result in serious injuries.
• Children and young persons under 18 years of age as well
as persons who have not read the instruction manual are not
allowed to operate this product.
• Never work while persons, in particular small children, or pets
are close to you.
• Do not allow other persons, especially children, to touch the
tool or motor.

Personal protective equiment

• Never work without suited protective equipment.
Do not wear loose-fitting clothes or jewellery, they could
−
be caught by movable parts.
safety goggles
−
ear protection
−
Anti-slipping cut-proof boots (safety shoes) with steel-toes
−
Fire extinguisher and spade (sparks may occur during
−
working)
First-aid material
−
Mobile telephone if required
−