Adjusting The Back Height; Seat Upholstery - Otto Bock M1 Intro Bedienungsanleitung

6.11 Adjusting the back height (Fig. 32)
The back tube which is integrated into the posterior frame allows for the adjustment of the back
height in increments of 2.5 cm.
INFORMATION!
Remove the screws A and B from the rear wheel adapter.
Set the desired back height.
INFORMATION!
Make sure to firmly retighten all screws and nuts after making adjustments (8 Nm).
6.12 Seat upholstery (no figure)
Should your seat upholstery become stretched out after longer use, contact your dealer to have
it replaced with a new seat upholstery.
54
32