Accessories; Anti-Tipper; Transport Wheels - Otto Bock M1 Intro Bedienungsanleitung

INFORMATION!
Slide four fingers between the spokes near the hub of the rear wheel. Then press
the button of the quick-release axle with your thumb. You can then easily pull off the
rear wheel.
Follow the corresponding procedure when remounting.
INFORMATION!
When remounting, be sure the quick-release axle securely locks into the quick-release
axle housing.
The rear wheel must not be removable when the button is not being pressed!

5 Accessories

The wheelchair is designed as a modular assembly system. This means that certain accesso-
ries can be adapted to your wheelchair. In the following, we will present you a selection of our
variants and accessories which improve the use and comfort of your wheelchair.
5.1. Anti-tipper (Fig. 6)
Prevents the wheelchair from tipping too far backward. Strongly recommended for untrained
wheelchair users as well as when extreme adjustments have been made to the rear wheel.
5.2. Transport wheels (Fig. 7)
With the rear wheels removed, the wheelchair can be used as a rolling base. This allows ma-
neuvering through narrow passage ways (such as bathroom doorways or airplane aisles).
INFORMATION!
Please note that once the rear wheels are removed, the wheel locks can no longer
be activated!
42
6 7