GM-Racing GENIUS 90 Bedienungsanleitung Seite 38

#15 BRAKEMIN (Minimum brake)
The min brake is the braking action which follows immediately after neutral. An ABS brake pulses
between the max braking action as selected on the throttle stick and the BRKMIN value.
recommended values: 0-50 %
Example: If you set MINBRK to 30% you'll have 30% of the breaking action at your disposition when
using the brakes. This means that the range of braking action is distributed over 30% and the max
braking action. You'll thus have a more sensitive control of the brakes.
#16 RESERVED
Attention! If you use uneven values for RESERVED, the warranty will be lost and the temperature
protection will be switched off!
0 = LiPo undervoltage protection
1 = Temperature protection off (if you use this setting, you will loose the warranty!) (LiPo undervolt. p.)
2 = IFMAR/EFRA hall sensor mode (LiPo undervoltage protection)
3 = Temperature protection off (if you use this setting, you will loose the warranty!)
,IFMAR/EFRA hall sensor mode (LiPo undervoltage protection)
4 = 4V undervoltage protection
5 = Temperature protection off (if you use this setting, you will loose the warranty!) (4V undervoltage p.)
6 = IFMAR/EFRA hall sensor mode (4V undervoltage protection)
7 = Temperature protection off (if you use this setting, you will loose the warranty!)
,IFMAR/EFRA hall sensor mode (4V undervoltage protection)
8-15: only brushless motors can be used, brushed motor configurations are switched off:
8 = LiPo undervoltage protection
9 = Temperature protection off (if you use this setting, you will loose the warranty!) (LiPo undervolt. p.)
10 = IFMAR/EFRA hall sensor mode (LiPo undervoltage protection)
11 = Temperature protection off (if you use this setting, you will loose the warranty!)
,IFMAR/EFRA hall sensor mode (LiPo undervoltage protection)
12 = 4V undervoltage protection
13 = Temperature protection off (if you use this setting, you will loose the warranty!) (4V undervoltage p.)
14 = IFMAR/EFRA hall sensor mode (4V undervoltage protection)
15 = Temperature protection off (if you use this setting, you will loose the warranty!)
,IFMAR/EFRA hall sensor mode (4V undervoltage protection)
16-23 new brake software will be activated:
16 = LiPo undervoltage protection
17 = Temperature protection off (if you use this setting, you will loose the warranty!) (LiPo undervolt. p.)
18 = IFMAR/EFRA hall sensor mode (LiPo undervoltage protection)
19 = Temperature protection off (if you use this setting, you will loose the warranty!)
,IFMAR/EFRA hall sensor mode (LiPo undervoltage protection)
20 = 4V undervoltage protection
21 = Temperature protection off (if you use this setting, you will loose the warranty!) (4V undervoltage p.)
22 = IFMAR/EFRA hall sensor mode (4V undervoltage protection)
23 = Temperature protection off (if you use this setting, you will loose the warranty!)
,IFMAR/EFRA hall sensor mode (4V undervoltage protection)
24-31: only brushless motors can be used, brushed motor configurations are switched off
and the new brake software is activated:
24 = LiPo undervoltage protection
25 = Temperature protection off (if you use this setting, you will loose the warranty!) (LiPo undervolt. p.)
26 = IFMAR/EFRA hall sensor mode (LiPo undervoltage protection)
27 = Temperature protection off (if you use this setting, you will loose the warranty!)
,IFMAR/EFRA hall sensor mode (LiPo undervoltage protection)
28 = 4V undervoltage protection
29 = Temperature protection off (if you use this setting, you will loose the warranty!) (4V undervoltage p.)
30 = IFMAR/EFRA hall sensor mode (4V undervoltage protection)
31 = Temperature protection off (if you use this setting, you will loose the warranty!)
,IFMAR/EFRA hall sensor mode (4V undervoltage protection)
recommended values for Touring cars are: 6 and 22!
15