Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Specifications - GM-Racing GENIUS 90 Bedienungsanleitung

Brushless + brushed
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Error messages:
1.)
1s
3x
3x
red
red
ye
ye
rot
rot
red LED flashes 3x,
red LED flashes 3x,
yellow LED off
yellow LED off
Description of error:
If you hear a continuous beeping (repeated triple short beep) and / or the red LED flashes continuously
when you connect the speed controller to the power supply, then either the motor is connected
incorrectly or is not connected at all.
Eliminating the error: Check the motor connections, connect the motor correctly.
2.)
1s
1s
red ye
red ye
rot
rot
Description of error:
If you hear a continuous beeping (single long beep) and the red LED flashes continuously, then the
operating voltage is too high.
Eliminating the error:
Select the correct operating voltage for the operating mode, i.e. use a battery with the appropriate
number of cells.
3.) Description of error:
The controller does not work at all.
Eliminating the error:
Operating voltage too low. Charge the flight battery and check that all connectors are making good
contact.
If this does not solve the problem, send the controller to us for checking.

Technical specifications:

Designation:
Order-No.
Operation voltage [V]:
Number of cells Ni-MH, Ni-Cd:
Number of cells LiPo:
Continous current (brushless m.)
Peak current 10sec
Pulse current at 25°C
Internal resistance at 20°C app.
Voltage drop @20A approx.
Temperature cut-off:
Low voltage run down:
BEC:
Max. BEC Power loss:
Pulse frequency:
Dim [mm] with capacitor app.:
Weight without wires app.:
Weight with wires and conn. app.:
Accessories:
2894.3 Opto-coupler for galvanic sparation for Genius and other BEC speedos with use of receiver pack
2894.4 Adapter cable for sensor (GM EVO3/Dr. Speed/LRP/Reedy motors) 10cm
2894.5 Interface cables GMVIS-Commander/Genius
7168.6 Interface USB cable PC (Windows XP or 2000) / Genius
2894.7 Receiver cable for Genius 50,80,85,95,100 (servo cable) 20cm
2894.8 Adapter cable for sensor (GM EVO3/Dr. Speed/LRP/Reedy motors) 20cm
2894.9 Adapter cable for sensor (GM EVO2 IFMAR SPEC / Novak motors)
2894.10 Receiver cable for Genius 50,80,85,95,100 (servo cable) 10cm
2894.12 R/C-Tester and GENIUS-Programmer for GENIUS-speed controller
2894.16 Power Capacitor PCB-board 7x 470µF/16V
2894.35 Power Capacitor PCB-board 7x 220µjF/35V
91539.10 power capacitor 4700µF/10V for 4-6 cells (3pcs.)
91539.16 power capacitor 2200µF/16V for 6-10 cells (3pcs.)
2894.L fan for GENIUS speedos 30mm x 30mm x 6mm
1s
1s
3x
3x
red
red
ye
ye
rot
rot
red LED flashes 3x,
red LED flashes 3x,
yellow LED off
yellow LED off
1s
1s
red ye
red ye
rot
rot
Genius 90
Genius 120
7164
7168
4,8-12
4,8-12
4-10
4-10
2 - 3
2 - 3
90A
120A
200A
250A
600A
800A
0,0005
0,0004
0,01V
0,008V
yes
yes
yes
yes
5,8V/short time 4A (all)
2,5W
2,5W
2/4/8/16 kHz
50x31x27 50x31x27
60g
60g
95g
95g
1s
1s
3x
3x
red
red
ye
rot
rot
red LED flashes 3x,
red LED flashes 3x,
yellow LED off
yellow LED off
1s
1s
red ye
red ye
red ye
rot
rot
rot
1s
3x
red
ye
ye
rot
red LED flashes 3x,
yellow LED off
1s
red ye
rot
19

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Genius 120

Inhaltsverzeichnis