Warnings - GM-Racing GENIUS 90 Bedienungsanleitung

Warnings:

- The controller's CE certificate doesn't unbind users from their obligation to use ultimate caution
- Should the motor refuse to start up, or after a crash, then you should immediately set the transmitter's
control stick to the OFF position to avoid any overload to the controller. Set the RPM limitation to 20
= 120.000 RPM or less, and select a softer start-up for a better and smoother start.
- Use only motors delivered by GM-Racing or Graupner which are designed for the intended range of
voltages!
- Use only high performance batteries by Graupner or GM-Racing. Using batteries with an
increased internal resistance may lead to the destruction of the controller!
- Never leave your transmitter unattended when a battery is connected. In case of a deficiency this may
cause an outbreak of fire on the model or its environment.
- Neither the controller nor any other electronic components should ever come in touch with water.
Protect the controller against dust, dirt, humidity, vibrations, or other dangerous elements (with the
exception of water-sealed controllers).
- Never run the motor on a seperate battery while the motor is connected to the controller. This may
destroy the controller, and leads to the loss of our warranty.
- Never mix up polarities. Use plug systems which offer protection against wrong polarity. Avoid
short-circuiting and blocking the motors.
- All cables and connectors should have good insulation. Short-circuits may lead to the destruction of
your motor.
- This product isn't designed for use by children under the age of 14, it isn't a toy!
- GM-controllers are designed for use in battery-driven, radio-controlled models only, any other use
is not permissible. Using this device on a passenger-carrying model is forbidden!
- Motors, gears or gearboxes, and propellers are dangerous objects. Never keep next to or in front of
the danger area of the drive!
- Technical defects or failures of mechanical or electronic parts may lead to an unexpected start-up of
the motor, with parts of it flying off, maybe causing severe injuries.
- Always check the service range of transmission of your model first thing while it's still on the
ground (hold the model tightly!).
- Don't make any changes on the structure and design of your controller unless they are described in
the manual!
- Limited warranty: Graupner Ltd cannot survey the proper application of the mounting and using
regulations, nor the working methods and conditions during the installation, use, operation, and
servicing of the controller. Therefore Graupner Ltd cannot take on any liability for any loss,
damage, or costs resulting from an incorrect use or operation of the product, or connected in any
way with incorrect use or operation.
- Only those components and accessory parts which have been recommended by us may be used. Use
only genuine and matching Graupner connectors and accessory parts.
- Make sure whenever you start connecting and operating the controller, that:
- your transmitter is the only one working on that frequency,
- is switched on,
- and has the throttle set to position "STOP".
- Use only high-quality batteries by Graupner or GM-Racing. Cheap or old batteries with a high internal
resistance may lead to poor performance or even to the destruction of the controller.
.
4