EMAK efco BLE 506 Betribs- Und Wartungsanleitung Seite 60

6.3.16 MAINTENANCE OF THE HYDROSTATIC TRANSMISSION
For the reliable operation of the transmission it is necessary to maintain the correct oil level. The filling openings on the transmissions
are accessible after taking the ejection chute off the machine (
Type of transmission
TUFF-TORQ K46
TUFF-TORQ K46 DE
TUFF-TORQ K62
TUFF-TORQ K664, KXH 10
Machines 106 4x4:
For the reliable operation of the transmission it is necessary to maintain the correct oil level. The filling opening of the transmissions
is located under the hood of the machine (
Type of transmission
TUFF-TORQ K 664
KANZAKI KXH 10 N
In the event of problems with the transmission immediately seek the help of an authorised service centre, there is a risk of serious
damage.
6.3.17 OVERVIEW OF THE TIGHTENING TORQUE OF BOLT CONNECTIONS
Mowing deck:
Central blade bolt
Nuts M12 on the mowing drive pulleys
Bolt 10x25 KL 100 RIPP on the arm of the mowing drive belt tensioning pulley
Steering:
Bolt M8x30 of the steering segment
M12 nut of steering segment
Engine:
Bolt of the electromagnetic clutch
Bolt of the travel belt pulley holder
When lock nuts are removed and then returned they need to be replaced with new ones.
Oil type
SAE 10W-40, API CD
SAE 10W-40, API CD
SAE 10W-40, API CD
SAE 5W-50, API CD
3.4.5). Prescribed values are provided in the following table.
Oil type
SAE 5W-50, API SG synthetic oil
SAE 5W-50, API SG synthetic oil
6.3.10). Prescribed values are provided in the following table.
at least to half the height of the equalisation tank
2 cm from the filling opening
5-7 mark on the equalisation tank
Between the marks on the filling bolt
according to the mark in the expansion tank (
according to the mark in the expansion tank (
60
Oil level
Oil level
3.4.5).
3.4.5).
Torque
30 ± 3 Nm
45 – 55 Nm
55 - 65 Nm
15 - 25 Nm
35 - 45 Nm
60 - 70 Nm
25 - 35 Nm