EMAK efco BLE 506 Betribs- Und Wartungsanleitung Seite 53

(continued)
INTERVAL
AFTER 50 HOURS
AFTER 100 HOURS
MONTHLY
BEFORE THE
SEASON
AFTER THE
SEASON
(PUTTING OUT OF
OPERATION)
Explanations for table:
1 = Replace more frequently if the riding mower is under greater load or works in outdoor temperatures around 35°C or higher.
2 = If the machine works in a dusty environment, perform the inspection more frequently.
3 = Perform the inspection more frequently if the machine works in a sandy environment.
4 = Perform the inspection more often if a new belt has been fitted.
N = Manual of the manufacturer, supplied with the machine.
Apart from regular maintenance according to the above table, it is necessary to replace motor oil based on the recommendations in
the manual drawn up by the engine manufacturer, which is included with the riding mower.
ASSEMBLY
Air filter and spark plugs
Lubrication
Engine, transmission,
electromagnetic transmission
Tyres
Mowing deck
Fuel filter
Battery
Travel drive belt
Mowing deck
Front axle and steering
Engine
Cables
Mowing deck
Inspection, replacement if necessary
Lubrication of parts according to lubrication plan
Inspection and adjustment of motion
Inspection of pressure
Inspection of tension of the cogged blade drive belt
Replacement
Inspection of electrolyte and cleaning
Inspection and adjustment
Inspection of tension of the cogged blade drive belt
Inspection of the correct tension of the mowing deck
drive V-belt
Inspection and adjustment of play
Oil change
Inspection of mounting, inspection of quick coupler parts
Cleaning
53
ACTIVITY
1,2
6.3.2
6.4
N
6.2.1
6.3.9
N
6.3.1
6.3.12
6.3.9
6.3.8
6.3.11
6.3.2
6.2.1
6.2.2