Guarantee - Dometic ColdMachine 54 Montage- Und Bedienungsanleitung

Guarantee

9.2 Accumulator function
The accumulator function ensures that cold energy is stored automatically (up to
8 hours) if enough electrical power is available, for example when supplied by a
mains adapter.
Stored cooling power is discharged
• automatically when the switch-off voltage is reached (see the table on page 18)
• or manually by pressing the discharge button (fig. 1 A2 or fig. 2 4, page 3).
I
NOTE
The cold accumulator can only be discharged manually if it was fully
charged beforehand.
The accumulator is automatically charged if,
• the restart voltage is exceeded
• or the accumulator is empty and you switch the device off and on again using the
control button(fig. 2 6, page 3, does only function on VD-06).
A
NOTICE!
When you are discharging the accumulator, although there is an
external supply of power – for example to avoid operating noise from
the compressor – use the main switch to switch the unit off (fig. 1 B1 or
fig. 2 6, page 3).
I
NOTE
Please remember: Low internal temperature = high current
consumption!
10 Guarantee
The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the
addresses) or your retailer.
For repair and guarantee processing, please include the following documents when
you send in the device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
28
Coldmachine
EN