Power Up And Basic Parameter Setup; Start Up Procedure - Omron VARISPEED E7 CIMR-E7Z Kurzanleitung

Power Up and Basic Parameter Setup

Start Up Procedure

EN-15
START
Installation
Wiring
Set power supply voltage jumper *1
Turn power ON
Confirm Status
Basic settings
(Quick Programming Mode)
Set E1-03.
V/f default: 400V/50Hz
Motor cable over
50 m or heavy
load possibly
causing motor to
stall or overload?
NO
Application settings
(Advanced Programming Mode)
No-load
operation
Loaded
operation
Optimum adjustments and
parameter settings
Check/record parameters
END
Fig 8 Trial Operation Flowchart
*1: Set the jumper for 400V class
Inverters of 75kW and more
YES
Non-rotating autotuning for
line-to-line resistance