Error number
Error description and possible diagnosis
E4.0
LAST SETUP IMPERMISSIBLE
Internal software error
- Contact JÄCKLE customer service
This error is shown only on the display, but not saved in the error memory.
Delete this error by switching the unit off and on again.
E4.1
JOBS FALSE
Internal software error
- Contact JÄCKLE customer service
This error is shown only on the display, but not saved in the error memory.
Delete this error by switching the unit off and on again.
E4.2
MAG SYN SPECIAL FUNCTION INCORRECT
Internal software error
- Contact JÄCKLE customer service
This error is shown only on the display, but not saved in the error memory.
Delete this error by switching the unit off and on again.
E4.3
MAG MAN SPECIAL FUNCTION INCORRECT
Internal software error
- Contact JÄCKLE customer service
This error is shown only on the display, but not saved in the error memory.
Delete this error by switching the unit off and on again.
E4.4
SPECIAL FUNCTIONS (Fx) MIG-PULSE INVALID
Internal software error
- Contact JÄCKLE customer service
This error is shown only on the display, but not saved in the error memory.
Delete this error by switching the unit off and on again.
E4.5
SPECIAL FUNCTIONS (Fx) MIG-DOUBLEPULSE INVALID
Internal software error
- Contact JÄCKLE customer service
This error is shown only on the display, but not saved in the error memory.
Delete this error by switching the unit off and on again.
E5.0
MAG PROGRAMS MISSING
Internal software error
- Contact JÄCKLE customer service
This error is shown only on the display, but not saved in the error memory.
Delete this error by switching the unit off and on again.
E5.1
WELDING PROGRAMS MIG PULSE NOT AVAILABLE
Internal software error
- Contact JÄCKLE customer service
This error is shown only on the display, but not saved in the error memory.
Delete this error by switching the unit off and on again.
E5.2
Not used
E5.3
ELECTRODE PROGRAMS MISSING
Internal software error
- Contact JÄCKLE customer service
This error is shown only on the display, but not saved in the error memory.
Delete this error by switching the unit off and on again.
E5.4
TIG PROGRAMS MISSING
Internal software error
- Contact JÄCKLE customer service
This error is shown only on the display, but not saved in the error memory.
Delete this error by switching the unit off and on again.
E5.5
MAG MAN. PROGRAMS MISSING (MAG manual programs missing)
Internal software error
- Contact JÄCKLE customer service
This error is shown only on the display, but not saved in the error memory.
Delete this error by switching the unit off and on again.
Operating manual
ProPuls 330,400,500
Page 62