J) Installing The Winglets On The Fuselage - Reely SKY Jet Liner Bedienungsanleitung

j) Installing the winglets on the fuselage

Use a sharp box cutter to cut out the recess for the installation of the winglets.
Remove the foil using a box cutter as shown in figure 12b. Make sure that you
only cut the foil and do not cut the wood underneath.
Glue the winglets into the cut-out (2) using 5-minute epoxy glue. Make sure
that the winglet is flush with the fuselage.
Figure 12a
Figure 12b
Figure 12c
43