d) Installing the nose landing gear
Take the stencil for the nose wheel cutout (1) from the decal sheet and stick it
onto the fuselage in centre.
Take a box cutter and cut along the lines to cut open the nose wheel recess.
Install the steering linkage (1) and the retraction linkage (2) on the nose landing
gear.
Push the nose landing gear with the linkage rods first into the provided recess
in the fuselage nose.
Use 4 wood screws to screw tight the nose landing gear in the fuselage as
shown in figure 20c.
48
Figure 20a
Figure 20b
Figure 20c