Creating And Configuring Accounts For Voip Providers - Auerswald COMfortel 2600 IP Inbetriebnahmeanweisungen

Further Steps
– Configure a username and a password for the configuration manager (see
page

Creating and Configuring Accounts for VoIP Providers

Requirements
– Setup assistant started (
– Account configured at a VoIP provider and knowledge of the access data
1.
Tap on With provider profile.
2.
Tap on the profile of the required VoIP provider (e.g. Talk2u IPv4 V100).
3.
If required, you can now setup VLAN (see operation guide Settings > Ether-
net > Switching the VLAN On/ Off and Configuring it).
4.
Tap on OK.
5.
In the Username entry field, enter the username given by the VoIP provider
and tap on OK.
Note: To edit incorrect entries, tap on the required entry field and the
Android keyboard with a delete button opens. If you press the back key, the
Android keyboard closes.
6.
In the Password entry field, enter the password given by the VoIP provider.
7.
Tap on OK.
8.
In the list field select the corresponding country for the account.
9.
Tap on Area code and enter the corresponding area code for the account.
10.
Tap on Numbers and enter the telephone number given by the VoIP pro-
vider.
11.
Tap on OK.
12.
Tap on Default account.
Note: If another account (e.g. a system telephone account) has already
been selected as default account, select the Not default account option.
COMfortel 2600 IP/3600 IP - Firmware V2.4 - Setup V04 02/2016
60).
> Settings > Setup assistant)
Commissioning
59