Preparation
Important Information on the Location of the Telephone
Requirements
–
Connections close to the installation location of the telephone
Warning: Liquid that penetrates the casing can cause life-threatening elec-
tric shocks and damage or destroy the telephone.
Only operate the telephone in closed, dry rooms.
Caution: Mechanical stress and electromagnetic fields can result in the
damage or destruction of the device or interferences in function.
Avoid mechanical loads (e.g. vibrations).
Avoid the proximity of devices which radiate electromagnetic fields (for
Do not expose the device to direct sunlight.
Protect the device from dirt, excessive dust, condensation, caustic
Note the values for ambient temperature given in the technical data.
Assembling the Telephone
•
Place the telephone on a clean, flat surface.
Caution: Some paints or plastics used on furniture may react chemically
with the plastic feet on the device and cause them to soften. Plastic chem-
ically changed in this way on the feet of the device may cause damage to
the surface of your furniture.
Place the telephone on a non-slip pad.
52
Output socket of the DSL router or a network socket (if required with PoE
support)
For wall wart or PoE injector (if required): network socket
example, radio sets, professional radio equipment, amateur radio
equipment, mobile phones, DECT systems, WLAN routers, etc.).
liquids, and steam.
COMfortel 2600 IP/3600 IP - Firmware V2.4 - Setup V04 02/2016