Important Information; Used Symbols And Signal Words; Safety Information - Auerswald COMfortel 2600 IP Inbetriebnahmeanweisungen

Important Information

Important Information
This section contains necessary information to operate your equipment safely. Before you
put the telephone into operation, it is absolutely necessary to read the safety information and
to make yourself familiar with the proper use of the device and the technical data.

Used Symbols and Signal Words

Warning:
Warns of personal injury caused, for example, by hazardous electrical volt-
age.
Caution:
Warns of material damage.
Important:
Indicates possible application errors and conditions which, for example,
could cause function limitations or malfunctions during operation.
Note:
Marks complementary hints and notes.

Safety Information

Warning: Improper handling of the device can cause life-threatening elec-
tric shocks and can damage or destroy the device.
 Read the instructions for the device and keep them for future reference.
Warning: Inappropriate use or incorrect replacement of the wall wart can
cause life-threatening electric shocks or can damage or destroy the device.
 Only use the wall wart supplied with the equipment.
 Make sure it is plugged firmly into the power socket. Loose plugs or
 Do not pull at the cable of the wall wart. To disconnect the power supply,
 If the wall wart is damaged, disconnect the fuse for the power supply
 Ensure you comply with the relevant regulations when handling supply
Warning: Liquid that penetrates the casing can cause life-threatening elec-
tric shocks and can damage or destroy the device.
36
COMfortel 3600 IP: type no. FW7577/EU/40
power sockets are a fire risk.
pull out the wall wart at the plug itself.
before pulling out the wall wart.
voltage and devices attached to the power supply.
COMfortel 2600 IP/3600 IP - Firmware V2.4 - Setup V04 02/2016