Proper Use - Auerswald COMfortel 2600 IP Inbetriebnahmeanweisungen

Important Information
Caution: Improper cleaning or operation can damage or destroy the dis-
play.
 Keep the display clean. To do this, use a soft, dry cloth (for COMfortel
 To operate the telephone, use your fingers or a special touch pen.
 Never apply force or excessive pressure when touching the display.

Proper Use

Important: Auerswald products are not designed, manufactured, or
intended for use or resale, in environments that require fail-safe perfor-
mance, such as in the operation of life-support systems and/or nuclear facil-
ities. Our products can only be used for these purposes with prior written
permission from Auerswald in each individual case.
Important: Improper use may, for example, cause functional restrictions or
interference, the destruction of the device or, in a worst-case scenario, per-
sonal injury.
 If you are still uncertain about how to use the product properly after
 Read the instructions for the device and keep them for future reference.
The COMfortel 2600 IP/3600 IP is a VoIP telephone which can be operated in
a Local Area Network (LAN) as Auerswald VoIP system telephone and/or
standard VoIP telephone.The telephone can administer up to 100 VoIP
accounts. One of these accounts can be used as the system telephone account.
For the operation as an Auerswald system telephone, one of the following
Auerswald PBXs is required:







As standard VoIP telephone, the COMfortel 2600 IP/3600 IP can also be oper-
ated on the following Auerswald PBXs:
38
3600 IP in the scope of delivery).
Under no circumstances use pointed objects on the display (e.g. ball-
point pens or pencils).
reading the chapter below, please contact your specialised dealer.
COMpact 4000
COMpact 5000/R (for COMfortel 3600 IP firmware version 6.4D or later)
COMpact 5010 VoIP (firmware version 4.2F or later)
COMpact 5020 VoIP (firmware version 4.2F or later)
COMmander 6000/R/RX (for COMfortel 2600 IP firmware version 6.0C
or later, for COMfortel 3600 IP firmware version 6.4D or later)
COMmander Basic.2/19" (firmware version 4.2F or later)
COMmander Business/19" (firmware version 4.2F or later)
COMfortel 2600 IP/3600 IP - Firmware V2.4 - Setup V04 02/2016