Creating An Announcement For The Answering Machine (Only Comfortel 2600) - Auerswald COMfortel 1600 Inbetriebnahmeanweisungen

You can switch off the readiness (call acceptance) by tapping
by tapping
Important: If the initialisation is not successful after inserting the memory card (
still visible with short interruptions), the card is not supported.
Further steps
• Create one or more separate announcements (see
• Configure the answering machine according to your requirements. Carry out the config-
uration either using the menu on the telephone display (see the Operation Guide of the
telephone) or using the PC software included in the package (recommended; see
page 52).
Note: If you would like to remove the card, you can unlock it by lightly pressing on the
memory card.
Creating an Announcement for the Answering Machine (only
COMfortel 2600)
Requirements
• Answering machine put into operation
1. Press the menu key.
2. Tap successively on answer.machine > settings > edit announcem. > new an-
nouncement.
3. Enter a name for the announcement using the keypad.
4. Tap on OK to complete the entry.
5. Tap on OK to start the recording.
6. Record the announcement.
7. Tap on OK to stop the recording.
8. Tap on playback.
You will hear the announcement you just recorded.
COMfortel 1600/2600 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V07 09/2016
. The symbol always reflects the current status.
and switch it on again
page 49).
Commissioning
is
49