Auerswald COMfortel 2600 IP Inbetriebnahmeanweisungen Seite 58

Commissioning
6.
Press the back key twice to close the provider settings.
7.
Tap on Accounts.
8.
Tap on New account.
9.
Tap on Providers & PBXs.
10.
Tap on the created provider (e.g. int Auerswald PBX sub system IPv4
V100).
11.
Tap on Username and enter the internal telephone number previously con-
figured in the PBX.
12.
Tap on OK.
13.
Tap on Password and enter the password corresponding to the internal
telephone number.
14.
Tap on OK.
15.
Tap on Numbers.
16.
Tap on New number.
17.
Tap on Numbers and enter the internal telephone number previously con-
figured in the PBX.
18.
Tap on OK.
19.
Press the back key twice.
20.
Tap on Country and area code.
21.
Tap on Area code and enter the area code for the location of the telephone.
22.
Tap on Country.
23.
Select the country for the location of the telephone in the list field.
24.
Press the back key.
25.
Tap on Usage.
58
The new provider is displayed under Providers & PBXs currently
configured (e.g. int Auerswald PBX sub system IPv4 V100).
The telephone registers at the PBX. If the registration was successful,
a corresponding message will be displayed. The telephone is now
ready for use.
COMfortel 2600 IP/3600 IP - Firmware V2.4 - Setup V04 02/2016