Creating An Announcement For The Answering Machine (Only Comfortel 1400) - Auerswald COMfortel 1200 Anleitung

Further steps
Create one or more separate announcements (see
Configure the answering machine according to your requirements. Carry
out the configuration either using the menu on the telephone display (see
the Operation Guide) or using the configuration software COMfortel Set
(recommended; see
Creating an Announcement for the Answering Machine (only
COMfortel 1400)
Requirements
– Answering machine put into operation
1.
Press the menu key.
2.
Tap successively on answer.machine > settings > edit announcem. >
new announcement.
3.
Enter a name for the announcement using the keypad.
4.
Tap on OK to complete the entry.
5.
Tap on OK to start the recording.
6.
Record the announcement.
7.
Tap on OK to stop the recording.
8.
Tap on playback.
9.
Tap on store.
Note: If you are not satisfied with the results, tap on new announcement.
After doing this, you can make a new recording.
Further steps
Assign the announcements to the various call types. You can assign the
announcements either via the menu on the display (in answer.machine >
functions > TAM announcem. > ...) or via the configuration software
COMfortel 1200/1400 - Firmware Version 1.4 - COMfortel Set 3.6.0 - Setup V01 04/2014
The answering machine has now been activated.
page
You will hear the announcement you just recorded.
51).
Commissioning
page 49).
49