Settings For Commander Basic And Compact 2204/2206/4410 Usb/4406 Dsl; Settings For Compact 2104 /Usb/Dsl 2) - Auerswald Comfort 300 Bedienungsanleitung

ENGLISH
signal that has to be switched on for a subscriber
in an Auerswald PBX system.
A name saved in the PABX (e.g. in the
short-code dialing memory) will have sec-
ond priority to an existing entry in the telephone
book of the telephone.
The time stored in the telephone will be overwrit-
ten by the information from a call.
Settings for COMmander Basic and
COMpact 2204/2206/4410 USB/4406 DSL
Make sure that the PABX has the software version
1.6A or higher and the configuration software
COMset is the version 2.5.6 or higher. If not,
please perform the necessary updates. Besides
this activate in COMset under Subscriber
features the extended CLIP info for the subscrib-
er and set the Hook-Flash time to 100 ms (see
pic. 15).
pic. 15: Settings for
COMmander Basic
COMpact 2204 USB
COMpact 2206 USB
COMpact 4410 USB
COMpact 4406 DSL
pic. 16: Settings for
COMpact 2104
COMpact 2104 USB
COMpact 2104 DSL
2. The PABX systems listed here may not be available in each country.
When configuring the internal telephone
numbers the telephone will be defined as
DTMF telephone on the analog port or on the 8a/b
module.
Settings for COMpact 2104 /USB/DSL
Make sure that the PABX has the software version
1.4H or higher and the configuration software
COMpact 2104 Set has the version 3.2.2 or
higher. If not, please perform the necessary
updates. Beside this activate in COMpact
2)
2104 Set under subscriber features the CLIP
info with date and time and the Hook-Flash
function has to be deactivated
The PBX systems COMpact 2104, COMpact 2104
USB and COMpact 2104 DSL do not support the
transmission of the name. If the name of the caller
has to be displayed in addition to his telephone
number, it has to be entered into the telephone
book of the telephone.
21
2)
(pic. 16).
or „Yes"