Creating An Announcement For The Answering Machine (Only Comfortel 2600) - Auerswald COMfortel 1600 Installationsanleitung

You can switch off the readiness (call acceptance) by tapping
switch it on again by tapping
status.
Important: If the initialisation is not successful after inserting the memory
card (
Further steps
– Create one or more separate announcements (see
– Configure the answering machine according to your requirements. Carry
out the configuration either using the menu on the telephone display (see
the Operation Guide of the telephone) or using the PC software included in
the package (recommended; see
Note: If you would like to remove the card, you can unlock it by lightly
pressing on the memory card.
Creating an Announcement for the Answering Machine (only
COMfortel 2600)
Requirements
– Answering machine put into operation
1.
Press the menu key.
2.
Tap successively on answer.machine > settings > edit announcem. >
new announcement.
3.
Enter a name for the announcement using the keypad.
4.
Tap on OK to complete the entry.
5.
Tap on OK to start the recording.
6.
Record the announcement.
7.
Tap on OK to stop the recording.
8.
Tap on playback.
9.
Tap on store.
Note: If you are not satisfied with the results, tap on new announcement.
After doing this, you can make a new recording.
COMfortel 1600/2600 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V06 05/2015
is still visible with short interruptions), the card is not supported.
You will hear the announcement you just recorded.
Commissioning
. The symbol always reflects the current
page
page 52).
and
49).
49