Auerswald COMfortel 2600 IP Inbetriebnahmeanweisungen Seite 37

 Only operate the telephone in closed, dry rooms.
 Only clean the casing of the device with a slightly damp cloth or an anti-
 When cleaning the casing, make sure that no liquid enters the casing.
Warning: Damaged connection lines, or damage to the casing or the
device, can cause life-threatening electric shocks.
 Only connect the device's connection cable with the sockets that are
 Have damaged connection lines replaced immediately.
 Only use original accessories and original replacement parts.
 Contact a professional to make any necessary repairs without delay.
 Do not touch the contact points with pointed, metallic or damp objects.
 Do not carry the device by the connection cables.
 Use the cable channels at the bottom of the telephone to reduce strain.
Warning: Power surges, which can occur during electrical storms, can
cause life-threatening electric shocks, or damage or destroy the device.
 Do not connect or disconnect power cables during an electrical storm.
 Hire a qualified electrician to lay the cables within the building.
 Protect the devices by installing overvoltage protection.
Warning: When using Power-over-Ethernet (PoE) electrical circuits, there
is a risk of electric shocks if you create connections with uninsulated,
exposed metal contacts, conductors, or terminal clamps.
 Avoid creating connections of this kind unless the exposed metal con-
Warning: Non-approved headsets, external speakers, or receivers may
cause hearing damage or interfere with the voice connection.
 Only use this telephone with approved accessories with the CE mark.
Warning: The telephone receiver creates a weak magnetic field, which
may attract small magnetic objects, such as needles and paper clips.
 To avoid injuries, do not put down the receiver close to such objects.
Warning: The device contains small parts which can be swallowed by
small children.
 Keep the telephone out of reach of children.
COMfortel 2600 IP/3600 IP - Firmware V2.4 - Setup V04 02/2016
static cloth.
designed for that purpose.
Please contact your qualified electrician or the manufacturer directly.
tacts are installed in areas with restricted access. A restricted access
area can only be accessed by using a special tool, lock and key or other
means of security. In addition, people who have been granted access
to these areas will have been explicitly informed about these hazards.
Important Information
37