Creating An Announcement For The Answering Machine (Only Comfortel 1400) - Auerswald COMfortel 1200 Inbetriebnahmeanleitung

Commissioning
the Operation Guide) or using the configuration software COMfortel Set
(recommended; see page 49).
Creating an Announcement for the Answering Machine (only
COMfortel 1400)
Requirements
– Answering machine put into operation
1.
Press the menu key.
2.
Tap successively on answer.machine > settings > edit announcem. >
new announcement.
3.
Enter a name for the announcement using the keypad.
4.
Tap on OK to complete the entry.
5.
Tap on OK to start the recording.
6.
Record the announcement.
7.
Tap on OK to stop the recording.
8.
Tap on playback.
9.
Tap on store.
Note: If you are not satisfied with the results, tap on new announcement.
After doing this, you can make a new recording.
Further steps
– Assign the announcements to the various call types. You can assign the
announcements either via the menu on the display (in answer.machine >
functions > TAM announcem. > ...) or via the configuration software
COMfortel Set (recommended; see page 49).
48
COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015
You will hear the announcement you just recorded.