Scheppach MS150-42 Originalbetriebsanleitung Seite 28

– If it came into contact with a foreign object. Inspect
the product for damage and perform the required
repairs before starting again and working with the
product. If the product begins to experience ex-
ceptionally strong vibrations, switch it off immedi-
ately and check it.
– Any time you leave the product.
– Before you refuel.
• When the engine runs out, close the throttle valve. If
the engine has a petrol shut-off valve, close it after
use.
• Operating the product at excessive speed can in-
crease the risk of accidents.
• Be careful when adjusting the product and avoid trap-
ping fingers between the moving blade and rigid parts
of the device.
• Be particularly careful when mowing on yielding
ground, nearby rubbish tips, ditches and dykes.
• Avoid mowing in places where the wheels have trou-
ble gripping or mowing is unsafe in any other way.
• Watch out for traffic near a road.
DANGER
Risk of tripping!
Exercise particular caution when moving backwards
and pulling the product.
Before reversing, make sure there are no small children
behind you.
• The user must be adequately trained in the use, ad-
justment and operation of the machine (including pro-
hibited operations).
• Check the product regularly and make sure that all
start locks and push buttons are working properly be-
fore each use.
• Please note that improper maintenance, the use of
non-compliant spare parts, or the removal or modifica-
tion of safety devices can result in damage to the
product and serious injury to the person working with
it.
• Please note that the product's safety systems or
equipment must not be tampered with or deactivated.
Never remove any safety-related parts.
• Please note that the user must not change or manipu-
late any sealed engine speed control settings.
• Use only blades and accessories recommended by
the manufacturer. Use of other insert tools and acces-
sories may result in injury to the user.
• Always keep the product in good operating condition.
• It is necessary to take enough breaks to reduce noise
and vibration exposure.
6.3 Residual risks and protective
measures
Neglect of ergonomic principles
Negligent use of personal protective equipment (PPE)
Careless use or omission of personal protective equip-
ment may result in serious injury.
• Wear prescribed protective equipment.
28 | GB
Human behaviour, misconduct
• Always concentrate fully on all work.
Residual danger
• Can never be ruled out
Danger from noise
Hearing damage
Prolonged unprotected work with the product may cause
hearing damage.
• Always wear hearing protection as a matter of princi-
ple.
Behaviour in an emergency
In the event of an accident, initiate the necessary first aid
measures and seek medical assistance as quickly as pos-
sible.
Residual risks
The product has been built according to state-of-the-
art and the recognised technical safety rules.
However, individual residual risks can arise during
operation.
• Furthermore, despite all precautions having been met,
some non-obvious residual risks may still remain.
• Residual risks can be minimised if the "Safety Instruc-
tions" and the "Intended Use" together with the oper-
ating manual as a whole are observed.
• Prevent the product being unintentionally started up.
• Keep your hands away from the working area when
the product is in operation.
• Unintentional starting up of the product.
• Comply with the stipulated maintenance and safety in-
structions in the operating instructions.
WARNING
In case of extended working periods, the operating per-
sonnel may suffer circulatory disturbances in their
hands (vibration white finger) due to vibrations.
Raynaud's syndrome is a vascular disease that causes
the small blood vessels on the fingers and toes to
cramp in spasms. The affected areas are no longer
supplied with sufficient blood and therefore appear ex-
tremely pale. The frequent use of vibrating products can
cause nerve damage in people whose circulation is im-
paired (e.g. smokers, diabetics).
If you notice unusual adverse effects, stop working im-
mediately and seek medical advice.
7 Technical data
Type of engine
Displacement
Rotation speed
Max. speed
Engine output
Fuel
Tank contents
Engine oil
www.scheppach.com
4-stroke engine/air-cooled
150 cm³
2800 rpm
2800 rpm
2,6 kW/3,5 PS (2800 rpm)
Regular grade petrol/lead-
free max. 10% bioethanol
1.0 l
SAE 10W-30/SAE 10W-40