Vari RAPTOR Hydro K Bersetzung Der Originalbetriebsanleitung Seite 52

3.5.10.1 Troubleshooting
Problem
The engine will not start
The engine cannot be stopped
The engine lacks the power
The work tool will not rotate
The revolutions of the work tool are dropping
The machine is not moving
The machine travel will not stop
The machine is moving even when the lever is
in the neutral (N) position
The attachment drive will not stop
The control levers do not return back.
Other defect
Table 38: Troubleshooting
In the event of problems with the gearbox, visit the gearbox manufacturer's
web pages for more information
In the event of any problems with the engine, visit the web page of the engine
manufacturer or contact an authorized service centre for KOHLER engines
Tab 3: Technical support links
79 The internet inks were up-to-date as of 27 July 2017. After this date, the functionality of the links cannot be guaranteed.
52
Cause
The petrol tanks are empty
The petrol supply line is closed
The cap bleeder is clogged
The clutch plate carries away the carrier disc
Non-functional automatic choke
Defective spark plug
Another engine defect
Non-functional engine short-circuiting
Clogged air filter
Another engine defect
The engine is not started
The attachment drive clutch lever is not pressed
The attachment drive belt pulley is not engaged
The attachment drive belt is not tightened
Broken belt of the drive of the attachment
The belt of the drive of the attachment fell off
Broken attachment drive clutch cable.
Other defect
The clutch is slipping
The engine has not started
The travel clutch lever is not pressed
The bypass lever is in the position enabling the manual
travel.
Insufficient belt tension
Torn belt
The belt has come off
Broken attachment drive clutch cable.
Other defect
The tension pulley does not return back to its position
The inner Bowden cable is stiff; bent Bowden cable
The neutral position of the gearbox control lever is
moved.
Blocked up clutch
The inner Bowden cable is stiff; bent Bowden cable
Broken return spring
Other defect
79
Solution
Add petrol
Open the petrol supply line
Loosen the cap and try to start the engine; if the
engine ignites, tighten the cap and wait whether
the engine goes out; try to blow the pressurized
air to the cap through the holes.
Visit a service facility
Visit a service facility
Replace
Visit a service facility
Turn off the fuel supply, visit a service facility
Clean it or replace it for a new one
Turn off the engine immediately, visit a service
facility
Start the engine
Press the lever
Engage the pulley according to the instructions
contained in the operating instructions for the
attachment
Adjust the tension pulley
Replace the belt
Re-mount the belt
Visit a service facility
Visit a service facility
Adjust the clutch or visit a service facility
Start the engine
Press the lever
Move the lever to the position for the engine-
powered travel.
Adjust the tension pulley
Replace the belt
Re-mount the belt
Visit a service facility
Visit a service facility
Lubricate
Lubricate or replace the Bowden cable (visit a
service facility)
Adjust the bowden or visit a service facility
Visit a service facility
Lubricate or replace the Bowden cable
Replace with a new one
Visit a service facility
Visit a service facility
http://www.tufftorq.com/support/
https://kohlerpower.com/en/engines/
https://kohlerpower.com/en/engines/dealers
RAPTOR Hydro K