06_Power Measurement; 07_Data Transmission Protocols; 08_Led Lights; 09_Power Sensor Calibration - Elite DIRETO Anleitung

Direto uses a magnetic braking system that acts directly
on a moving metallic disc to gradually and uniformly
adjust resistance. This technology allows for very accurate
changes in slope, even when small, by taking into account
the inertia experienced when riding on the road. Both
increases and decreases in resistance adjustment are
thereby gradual. This system also ensures that pedals will
not lock-up, which could have occured at exceedingly high
power outputs.

06_POWER MEASUREMENT

Direto features an integrated power measurement system.
This patented system measures with great accuracy the
power developed by the cyclist during training.
Measured power accuracy: ± 2%.
Please visit www.elite-it.com for more info.

07_DATA TRANSMISSION PROTOCOLS

Direto uses two different transmission protocols to interact
and send data to software / app / device.
Please contact the app / software / device manufacturer
to verify compatibility with one or more of these protocols.
ANT+
"ANT+ FE-C" protocol: this protocol allows the software /
app / device to receive training data and adjust hometrainer
resistance. This protocol permits total interaction with the
hometrainer.
"ANT+ Speed&Cadence" protocol*: this protocol transmits
hometrainer speed and cadence data. Although more
common than the ANT+ FE-C, it does not allow interaction
and the app/software/device.
"ANT+ Power" protocol: this protocol transmits the
cyclist's power output data. Also much more common than
the ANT+ FE-C, but this protocol does not allow interaction
between the hometrainer and the app/software/device.
With the exception of smartphones that feature integrated
ANT+ connectivity, a USB dongle is necessary to connect
via the ANT+ protocol.
An ANT+ flash drive is required when using Android, PC
Windows and Mac devices. It's available for purchase on
the www.shopelite-it.com website or via other channels –
it's required to connect the device to the hometrainer via
the ANT+ protocol.
An OTG adapter cable is required for Android devices, while
iOS devices require a specific flash drive (not included)
compatible with the 30-pin iOS connector.
A complete list of ANT+ compatible devices is available at:
http://www.thisisant.com/directory/
BLUETOOTH SMART
"Fitness Machine - Indoor Bike service" (FTMS) protocol.
This protocol sends training data to compatible software
/ app / device and adjusts resistance on the hometrainer.
This protocol offers total interaction with the hometrainer.
"Speed&Cadence Service" protocol*: this protocol
transmits hometrainer speed and cadence data, but does
not allow interaction between software / app / device and
the hometrainer.
"Power Service" protocol: this protocol transmits the
cyclist's power output data, but will it also not allow
interaction between software / app / device and the
hometrainer.
In most cases, smartphones and tablets already feature
Bluetooth Smart connectivity, so there is no need for
additional components to communicate with the Direto.
However, the more outdated devices might not be
compatible. Please consult your app provider to make sure
that it's Bluetooth Smart compatible.
NOTE: When the hometrainer is connected to the device
by a Bluetooth Smart protocol, it cannot be connected to
additional BLE devices.
This is a restriction of the Bluetooth Smart protocol itself.
* Warning: should the software / app / device employ the
Speed&Cadence protocol to detect speed, you must set a
wheel circumference value that equals the actual wheel
value divided by 12,1. For instance, if wheel circumference
is 2095mm, the value to input as circumference is 2095 /
12,1 = 173mm.

08_LED LIGHTS

Direto transmits speed, cadence and power data via the
ANT+ and Bluetooth Smart protocols.
There are 3 LED lights on the motherboard, displaying
power supply status, motherboard status and the protocol
being used.
The LED lights come in 3 colors with the following
meanings:
Red = status of hometrainer power supply
- Off = Direto is not receiving power or has the entered
sleep mode
- On = Direto is powered up.
Green = Direto is connected via the ANT+ protocol.
- Blinking = Direto is awaiting connection.
- On = Direto is transmitting data via the ANT+ protocol.
Blue = Direto is connected via the Bluetooth Smart
protocol.
- Blinking = Direto is awaiting connection.
- On = Direto is transmitting data via the Bluetooth Smart
protocol.

09_POWER SENSOR CALIBRATION

Direto can calibrate the internal power measurement
system, which clears the system settings in order to always
obtain accurate power values.
EN
35