Scope Of Supply; Environmental Conditions; Installation Regulations; Safety - Fronius Ri Io Pro/I Bedienungsanleitung

Scope of supply

Environmental
conditions
Danger from prohibited environmental conditions.
This can result in severe damage to equipment.
▶
Temperature range of ambient air:
-
-
Relative humidity:
-
-
Ambient air: free of dust, acids, corrosive gases or substances, etc.
Altitude above sea level: up to 2000 m (6500 ft).
Protect the device from mechanical damage during storage and operation.
Installation re-
The interface must be installed on a DIN rail in a switch cabinet for a machine or
gulations
robot.

Safety

Danger from incorrect operation and work that is not carried out properly.
Serious injury and damage to property may result.
▶
▶
▶
CAUTION!
Only store and operate the device under the following environmental con-
ditions.
During operation: 0 °C to + 40 °C (32 °F to 104 °F)
During transport and storage: -25 °C to +55 °C (-13 °F to 131 °F)
up to 50% at 40 °C (104 °F)
up to 90% at 20 °C (68 °F)
WARNING!
All the work and functions described in this document must only be carri-
ed out by trained and qualified personnel.
Read and understand this document.
Read and understand all the Operating Instructions for the system com-
ponents, especially the safety rules.
Englisch (US)
(1) Robot interface
(2) Cable harness for connection
to the welding machine
(1)
(3) Operating instructions (not
shown)
(2)
29