Fronius RI IO PRO/i Bedienungsanleitung Seite 39

Enter user name and password
7
Factory setting:
User name = admin
Password = admin
- The website of the welding machine is displayed
Note down the IDs of the desired characteristics:
On the welding machine website, select the "Synergic lines overview" tab
8
Note down the IDs of the characteristics that it should be possible to select
9
using the interface
On the welding machine website, select the tab for the interface used
10
For example: RI IO PRO/i
Under "Synergic line assignment", assign the desired characteristic IDs to the
11
program numbers (= bit numbers).
For example: Program number 1 = Synergic line ID 2501, Program number 2
= Synergic line ID 3246, etc.
- The assigned characteristics can then be retrieved using the interface
and the selected program numbers (=bit numbers)
Once all of the desired characteristic IDs have been assigned, press "Save as-
12
signment"
- All of the program numbers with their assigned characteristic IDs are
displayed under "Actual assigned program numbers to synergic lines"
Website of the welding machine
Englisch (US)
39