General; Scope Of Supply; Safety - Fronius Rc Bar Ud Tig Bedienungsanleitung

General

Scope of supply

Fernbedienung RC Bar Up/Down TIG/TMC*

Safety

Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
▶
▶
Danger due to welding processes starting unintentionally. Once the remote con-
trol has been connected, the welding process can be started using the welding
torch or the remote control.
Could result in serious personal injury and damage to property.
▶
Danger due to emerging wire electrode.
Personal injury may result.
▶
▶
▶
▶
14
WARNING!
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
Read and understand this document in full.
Read and understand all safety rules and user documentation for this equip-
ment and all system components.
WARNING!
Ensure that the welding process is only started intentionally.
CAUTION!
Hold the welding torch so that the tip of the welding torch points away from
the face and body.
Wear suitable protective goggles.
Do not point the welding torch at people.
Ensure that the wire electrode can only intentionally make contact with
electrically conductive objects.
(1) RC Bar Up/Down TIG/TMC
(2) RC Bar Up/Down TIG/TMC
operating instructions
(3) 2 pcs O-ring (42,0402,0247)
(4) 2 pcs O-ring (42,0402,0304)
(5) 1 pc Velcro fastener
(6) 4 pcs cable tie (4 m)
8 pcs cable tie (8 m)
* TMC - TIG Multi Connector