Fronius OPT/i WF R Bedienungsanleitung Seite 18

General
Functional The OPT/i WF R wirespool holder wire end sensor constantly monitors the
principle wirespool. Its integrated sensor detects when the final layer of the wire electrode
has been wound off and outputs a wire end alarm. This alarm does not interrupt
the welding process.
Prerequisites Atttention! The OPT/i WF R wirespool holder wire end sensor can only be used if
an OPT/i ext. sensor plug has been installed in the respective wirefeeder or Split-
Box.
Scope of supply
Safety
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
▶
▶
18
WARNING!
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
Read and understand this document in full.
Read and understand all safety rules and user documentation for this equip-
ment and all system components.