19.8 Installing the appliance
Slide the appliance and centre it.
1.
Do not kink the connection cable.
Open the oven door completely.
2.
Remove the cover.
3.
Screw the appliance tightly onto the unit.
4.
Put the protective cover on.
5.
Note: Never close the gap between the worktop and the
appliance using additional battens.
19.9 Removing the appliance
Disconnect the appliance from the power supply.
1.
Undo the fastening screws.
2.
Lift the appliance slightly and pull it out completely.
3.
Installation instructions en
51