Bosch VBD5780S0 Gebrauchs- Und Montageanleitung Seite 43

Grip the appliance door on either side with both
3.
hands and close it by approx. 30 degrees.
Do not close the appliance door fully. The hinges
could become bent and the enamel could be dam-
aged.
Lift the appliance slightly and pull it out completely.
4.
14.4 Attaching the appliance door
WARNING ‒ Risk of injury!
If the hinges are not secured due to an incomplete lock,
they can snap shut with great force.
If the hinge snaps shut when detaching or attaching
the appliance door, do not reach into the hinge.
Call customer service.
15 Troubleshooting
Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-
sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist staff.
If the appliance is defective, call Customer Service.
"Customer Service", Page 45
WARNING ‒ Risk of electric shock!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist staff.
Only use genuine spare parts when repairing the appliance.
If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer's Cus-
tomer Service or a similarly qualified person in order to prevent any risk.
15.1 Malfunctions
Fault
The appliance is not working.
The appliance does not start.
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
There has been a power cut.
Check whether the lighting in your room or other appliances are working.
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
The appliance door is not fully closed.
Close the appliance door.
If a door pane or appliance door has not been installed
correctly, this is dangerous.
Make sure that all of the door panes and the appli-
ance door have been correctly fitted before you
switch the appliance back on again.
Grip the appliance door on either side with both
1.
hands.
Slide the hinges into the slots in the appliance.
2.
The notch below the hinges must engage into the
frame of the appliance.
Lower the appliance door downwards.
3.
Remove the locking pins.
4.
Note: Do not throw away the locking pins. Store the
locking pins in a secure location. You always require the
locking pins when you remove the door or door panels
from the appliance. If you do not have any locking pins,
you can order these from customer service.
Troubleshooting en
43