Scheppach HS550 Originalbetriebsanleitung Seite 34

18. Disposal and recycling
Notes for packaging
The packaging materials are recycla-
ble. Please dispose of packaging in
an environmentally friendly manner.
Notes on the electrical and electronic equipment
act (ElektroG)
Waste electrical and electronic equipment does
not belong in household waste, but must be col-
lected and disposed of separately!
• Used batteries or rechargeable batteries that are
not installed permanently in the old device must
be removed non-destructively before disposal!
Their disposal is regulated by the battery act.
• Owners or users of electrical and electronic devices
are legally obliged to return them after use.
• The end user is responsible for deleting their per-
sonal data from the old device being disposed of!
• The symbol of the crossed-out dustbin means that
waste electrical and electronic equipment must not
be disposed of with household waste.
• Waste electrical and electronic equipment can be
handed in free of charge at the following places:
19. Troubleshooting
Electrical maintenance work may only be carried out by a qualified electrician!
Fault
The saw does not brake
when switching the machine
off
Saw blade is loose after the
motor is switched off
Engine makes excessive
noise or hums
Burnt areas on the cutting
surface
Saw blade turns in the wrong
direction
Motor not supplying power,
fuse tripping
Possible cause
Brake system defective
Fixing nut not tight enough
Coils damaged, motor defective
Blunt saw blade
Incorrect saw blade
Incorrect polarity /
Incorrect connection
Cross section of the extension cable
insufficient
Overload due to blunt saw blade
www.scheppach.com
- Public disposal or collection points (e.g. municipal
works yards).
- Points of sale of electrical appliances (stationary
and online), provided that dealers are obliged to
take them back or offer to do so voluntarily.
- Up to three waste electrical devices per type of
device, with an edge length of no more than 25
centimetres, can be returned free of charge to
the manufacturer without prior purchase of a new
device from the manufacturer or taken to another
authorised collection point in your vicinity.
- Further supplementary take-back conditions of
the manufacturers and distributors can be ob-
tained from the respective customer service.
• If the manufacturer delivers a new electrical device
to a private household, the manufacturer can ar-
range for the free collection of the old electrical de-
vice upon request from the end user. Please contact
the manufacturer's customer service for this.
• These statements only apply to devices installed
and sold in the countries of the European Union
and which are subject to the European Directive
2012/19/EU. In countries outside the European Un-
ion, different regulations may apply to the disposal of
waste electrical and electronic equipment.
Remedy
Have the brake system checked and,
if necessary, replaced by a specialist
workshop.
Tighten the fixing nut (Attention: right-
hand thread)
Arrange for inspection of the engine by
a specialist workshop.
Sharpen saw blade or replace it if
necessary
Replace saw blade
Change direction of rotation with phase
inverter / Have an electrician change
the polarity of the wall plug.
see "Electrical connection"
Replacing the saw blade
GB | 34