Scheppach BG150 Originalbetriebsanleitung Seite 23

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
we wish you much pleasure and success in working
with your new device.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling
• Failure to comply with the operating instructions
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specified
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100,
DIN 57113 / VDE0113 not being observed
Note:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
This operating manual should help you to familiarise
yourself with your device and to use it for its intended
purpose.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual at the device, in a plastic
sleeve, protected from dirt and moisture. They must be
read and carefully observed by all operating personnel
before starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. 1)
1. Protective panel
1a. Philips screws M4
1b. Hexagonal nut
1c. Retaining bracket
1d. Flat round screw M6
1e. Washer
1f. Nut
2. Spark protection
2a. Phillips screw (incl. washer)
3. Grinding wheels (grit right: 60, left: 36)
4. Tool support
4a. Star grip screw
4b. Spring washer
4c. Washer
5. lamp
6. Grinding wheel cover
6a. Nut
6b. Flange
6c. Screws
7. Hole for workbench assembly
8. On/off switch
9. Tank for cooling water
10. Grinding wheel extractor
3. Scope of delivery
• Bench grinder BG150
• Protective panels (2x)
• Spark protection (2x)
• Tool support (2x)
• Grinding wheel extractor
• Assembly material
• Operating manual
4. Proper use
The bench grinder is a combination device for grind-
ing and polishing metals, plastics and other materials
using the appropriate grinding discs.
The machine may only be used in the intended manner.
www.scheppach.com GB | 23