Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation Instructions for Controller
① Equipment installation
Tap "EQUIPMENT INSTALLATION" icon to enter the unit configuration interface. You can turn on or off the
corresponding functions in this interface.
Function
Zone 1
Zone 2
Pool
DHW
Buffer Tank
Solar
Allow Cool Mode
Allow Cool Mode of Zone2
SG Ready Control.
SG2 compensation Temp. of Heating
SG2 compensation Temp. of DHW
SG2 compensation Temp. of Cooling
SG3 heating temp.
SG3 Cooling temp.
Bivalent Connection
Bivalent Temp.
Base plate heater ON condition
Base plate heater OFF condition
Allow tank heater
Tank heater power
Electric heating power
APP displays energy consumption monitoring
information
APP displays the thermostat information
Note: If one Zone in the system, set Zone 1 on; If two zones in the system, set Zone1 on and Zone 2 on.
② Compensation Temp.
Tap "COMPENSATION TEMP." icon in Picture 22 to enter the compensation temperature setting interface. You can set
the compensation temperature for each control object.
Picture 23
Parameter Range
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
2~6°C
4~8°C
-2~-6°C
20~30°C
16~30°C
On/Off
-20°C~20°C
-20~5°C
5~20min
ON/OFF
0.0~9.0kW
0.0~9.0kW
ON/OFF
ON/OFF
56
Default
On
Off
Off
Off
Off
Off
On
Off
Off
Off
-10°C
OFF
OFF
OFF
Werbung
