Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation Instructions for Controller
In the main interface, you can control ON/OFF, mode, and setting temperature. Click the mode area and slide left and
right to change the unit operation mode. Click each current temperature area and slide left and right to adjust the set
temperature.
Note:
During heating operation of the unit, the setting temperature of zone 1 is higher than zone 2; during cooling operation of
the unit, the set temperature of zone 1 is lower than zone 2. If the temperature of the later adjustment exceeds the limit,
the temperature in another area will change accordingly.
For example, in the heating mode, the set temperature of zone 1 is 45 °C, and the set temperature of zone 2 must be
less than or equal to 45 °C. If the set temperature of adjustment zone 2 is 48 °C, the set temperature of zone 1 will
automatically change to 48 °C.
If a third-party controller is selected, the setting temperature of the point displays "Link", and the controller cannot change
the set temperature, the temperature is determined by the third-party controller.
Menu
Tap the lower left menu icon , It will show the following interface:
Picture 5
Picture 6
48
Werbung
