RK Rose+Krieger RK MonoLine R Montageanleitung Seite 95

3.3.5 Clamping bars
Fig. 11: Clamping bars
3.3.6 Slot stones
Fig. 12: Slot stones
3.3.7 Centring sets
Fig. 13: Centring sets
Linear unit RK MonoLine R/RK MonoLine Z/RK MonoLine Z corrosion-protected
27.10.2023
The clamping bars are inserted on the side of the guide profile
and are used as a fixing element between the linear unit and the
substrate.
Further information:
n Assembling the linear unit with clamping bars
The slot stones are inserted on the underside of the guide profile
and are used as a fixing element between the linear unit and the
substrate.
Further information:
n Assembling a linear unit with slot stones
A Centring set for RK MonoLine R, Z 40
B Centring set for RK MonoLine R, Z 60/80/120 and Z 80
The centring sets are assembled in the holes provided for this
purpose on the guide carriage and are used as a positioning aid.
Further information:
n Assembling centring sets
Set-up and function
Optional modules > Centring sets
Ä Page 98
Ä Page 99
Ä Page 112
95