RK Rose+Krieger RK MonoLine R Montageanleitung Seite 133

A Declaration of incorporation
EC Declaration of Incorporation according to the Machinery Directive 2006/42/EC, Appendix II 1.B
Manufacturer
RK Rose+Krieger GmbH
Potsdamer Strasse 9
32423 Minden
GERMANY
Description and identification of the incomplete machine:
Product:
Type:
Serial number:
Project number:
Order:
Function:
The following basic requirements of the Machinery Directive 2006/42/EC as per Appendix I have been
applied and met:
1.1.5.; 1.3.; 1.3.2.; 1.3.4.; 1.3.7.; 1.3.8.; 1.3.9.; 1.6.1.; 1.6.3.
Furthermore, it is hereby declared that the special technical documents as per Appendix VII, Part B have
been created.
It is expressly declared that the incomplete machine complies with all relevant regulations of the following
EC Directives:
2006/42/EC
2011/65/EU
Reference to the harmonised standards in accordance with Article 7, Paragraph 2:
EN ISO 3744:2011-02
EN ISO 13857:2020-04
EN ISO 12100:2011-03
Linear unit RK MonoLine R/RK MonoLine Z/RK MonoLine Z corrosion-protected
27.10.2023
Authorised representative
Michael Neubaur
Potsdamer Strasse 9
32423 Minden
GERMANY
Linear unit
RK MonoLine R/RK MonoLine Z/RK MonoLine Z
See rating plate label on the front of these assembly instructions
See rating plate label on the front of these assembly instructions
See rating plate label on the front of these assembly instructions
Technical description:
A rotation movement is converted into a linear position movement of the
guide carriage via a timing belt. The upper side of the toothed belt is guided
by an additionally inserted profile.
Directive 2006/42/EC of the European Parliament and of the Council of
17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Directive 2011/65/EU of the European Parliament and of the Council of
8 June 2011 on the restriction of the use of certain hazardous substances
in electrical and electronic equipment.
Acoustics - Determination of sound power levels and sound energy levels
of noise sources using sound pressure measurements - Accuracy class 2
enveloping surface methods for an essentially free field over a reflecting
plane.
Safety of machinery - Safety distances to prevent hazard zones being
reached by upper and lower limbs.
Safety of machinery - General principles for design - Risk assessment and
risk reduction.
Declaration of incorporation
133