Drive Shaft; Limit Switch - Rk Rose+Krieger Rk Monoline R Montageanleitung

Set-up and function
Optional modules > Limit switch

3.3.3 Drive shaft

Fig. 9: Drive shaft
A Drive shaft for RK MonoLine Z 40
B Drive shaft for RK MonoLine Z 60 and
RK MonoLine Z 80

3.3.4 Limit switch

Linear unit RK MonoLine R/RK MonoLine Z/RK MonoLine Z corrosion-protected
94
C Drive shaft for RK MonoLine Z 80
D Drive shaft for RK MonoLine Z 120
The drive shaft is assembled on the pulley box and transmits tor-
ques from the motor to the linear unit.
Unlike the other sizes, the drive shaft in sizes Z
60 and Z 80
washer.
Further information:
n Assembling the drive shaft
Fig. 10: Limit switch
A Mechanical limit switch
B Inductive limit switch
The limit switch is assembled on the side of the guide profile above
holding plates/mounting brackets and stops the guide carriage
from exceeding the defined end positions.
Further information:
n Assembling limit switches
is not equipped with an adapter
Ä Page 107
Ä Page 109
27.10.2023