RK Rose+Krieger RK MonoLine R Montageanleitung Seite 112

Assembly
Assembling optional modules > Assembling the centring sets
5.4.5 Assembling the centring sets
Applicable to
Assembling the centring sets
Linear unit RK MonoLine R/RK MonoLine Z/RK MonoLine Z corrosion-protected
112
Version RK MonoLine R, Z, Z
Size 40/60/80/120
Personnel:
Protective equipment:
Prerequisite:
n The electric gear unit and/or motor (if available) are secured
against restarting.
Fig. 41: Assembling the centring sets
A Centring set for RK MonoLine R, Z 40
B Centring set for RK MonoLine R, Z 60/80/120 and Z 80
1. Place the centring sets (Fig. 41/1) in the holes of the guide
carriage provided for this purpose.
Centring set B is delivered with 2 screws.
Use the screw which corresponds to the
slot's depth.
2. Tighten the screw (Fig. 41/2):
Size Screw size
40, 60, 80, M4
120
ð The centring sets are assembled.
n Assembly staff
n Protective clothing
n Safety shoes
Tightening torque [Nm]
2
27.10.2023