RK Rose+Krieger RK MonoLine R Montageanleitung Seite 92

Set-up and function
Function description
RK MonoLine Z/RK MonoLine Z
Fig. 6: Overview of RK MonoLine R/RK MonoLine Z
1 Guide profile
2 Guide shaft
3 Pulley box
4 Timing belt shaft
Further information
3.2 Function description
Linear unit RK MonoLine R/RK MonoLine Z/RK MonoLine Z corrosion-protected
92
5 Guide carriage
6 Shaft lubrication
7 End cap
For further information, refer to the exploded over-
view of the spare parts drawing:
– RK MonoLine Z/
RK MonoLine Z linear unit
The linear unit is used for the linear movement and positioning of
axes.
The linear movement guided by the guide shafts is performed by a
guide carriage which travels along the guide profile.
The RK MonoLine R linear unit is designed without a drive. The
linear unit is primarily used as a torque compensator.
On the RK MonoLine Z/RK MonoLine Z
carriage moves automatically using a timing belt with a connected
electric drive.
The RK MonoLine Z
where condensation and dripping water is generated, either as a
result of the ambient conditions or the manufacturing process.
Ä Page 119
linear units, the guide
linear unit is also suitable for use in areas
27.10.2023