RK Rose+Krieger RK MonoLine R Montageanleitung Seite 115

Lubricating the guide shaft
Cleaning the lubrication point
Fig. 42: Lubricating the guide shaft
Lubricating the guide shaft
Linear unit RK MonoLine R/RK MonoLine Z/RK MonoLine Z corrosion-protected
27.10.2023
Personnel:
Protective equipment:
Prerequisite:
The electric gear unit and/or motor (if available) are secured
n
against restarting.
1. Clean the lubrication points (Fig. 42/1) on both sides of the
guide carriage (Fig. 42/2).
2.
Ensure that the oil press is axially aligned to
the lubrication nipple's direction of flow.
Place the oil press on the lubrication nipples (Fig. 42/1) on
both sides of the guide carriage (Fig. 42/2) one after the
other and lubricate the guide carriage.
3. Move the guide carriage (Fig. 42/2) several times to distribute
the lubricant evenly.
ð The guide shafts are lubricated.
Maintenance and troubleshooting
Lubricating the guide shaft
n Assembly staff
n Protective clothing
Safety goggles
n
n Protective gloves
n Safety shoes
115