Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.4 The operator's responsibility
Operator
The operator's obligations
Additional operator obligations
Linear unit RK MonoLine R/RK MonoLine Z/RK MonoLine Z corrosion-protected
27.10.2023
The operator is the person who operates the linear unit themselves
for commercial or economic purposes, or makes it available to a
third party for use/application and bears the legal product respon-
sibility for the protection of the user, staff or a third party during
operation.
The linear unit is used in the commercial sector. The operator
therefore is subject to the legal obligations relating to occupational
health and safety.
Aside from the safety information contained in this manual, the
safety, occupational health and safety and environmental protec-
tion regulations applicable to the linear unit's range of applications
must be adhered to.
The following particularly applies in this regard:
n
The operator must keep themselves informed of the applicable
occupational health and safety regulations and determine addi-
tional hazards which result from the special work conditions in
the linear unit's place of use during a risk assessment. The
results must be implemented in the form of operating instruc-
tions.
n
The operator must verify during the linear unit's operating time
whether the operating instructions they created comply with
the current regulations. If necessary, the operating instructions
must be adapted.
n
The operator must unambiguously regulate and specify the
responsibilities for assembly, operation, troubleshooting, main-
tenance and cleaning.
The operator must ensure that all persons handling the linear
n
unit have read and understood this manual. Furthermore, they
must regularly train the staff and inform them of the hazards.
The operator must ensure that the staff have been trained in
compliance with the required staff qualifications.
The operator must provide the staff with the required protective
n
equipment and must issue the mandatory order to wear the
required protective equipment.
n
The operator must ensure that danger zones occurring
during assembly, operation, troubleshooting, maintenance and
cleaning of the linear unit are secured.
The operator is further responsible for ensuring that the linear unit
and the place of use are in a technically perfect condition at all
times. Therefore, the following applies:
n
The operator must ensure the required clearances and suffi-
cient lighting for safe working, as well as ensuring that the
linear unit and the place of use are kept permanently clean and
tidy.
The operator must ensure that the maintenance intervals
n
described in this manual are adhered to.
Ä Chapter 6.2 'Maintenance plan' on page 113
Safety
The operator's responsibility
85
Werbung
